Princeton University Users: If you would like to view a senior thesis while you are away from campus, you will need to connect to the campus network remotely via the Global Protect virtual private network (VPN). If you are not part of the University requesting a copy of a thesis, please note, all requests are processed manually by staff and will require additional time to process.
 

Publication:

Laser Fabrication of Polymer-Based Mechanical Sensors Through Simultaneous Curing and Graphitization

dc.contributor.advisorArnold, Craig B.
dc.contributor.authorSanchirico, Amelia A.
dc.date.accessioned2025-08-14T13:20:24Z
dc.date.available2025-08-14T13:20:24Z
dc.date.issued2025-04-23
dc.description.abstractFlexible, polymer-based wearable sensors have been extensively studied over the past 30 years. Conventional sensors usually consist of a conductive material deposited into or onto a polymer substrate. Laser direct writing (LDW), a more recent innovation, allows conductive graphitic carbon to be directly patterned onto the surface of a polymer sheet, eliminating the need for the addition of a separate conductor. However, there are still ways to further streamline the fabrication process, including the use of LDW to induce formation of the substrate and conductive material simultaneously. This thesis presents a route towards the functionalization of this technique through the laser irradiation of uncured, liquid-phase polydimethylsiloxane (PDMS), a thermosetting elastomer. Scanning a near-infrared, continuous wave laser in a grid pattern across the surface of PDMS produces a mesh of conductive, graphitic carbon lines within a matrix of cured, solid polymer. The resulting structure shows potential as a wearable sensor, with a resistance at rest of about 26.9 k$\Omega$. Resistance increases with the application of external forces, and the sensor is able to detect changes in pressure and strain. As a possible avenue toward higher conductivity or graphene content, small concentrations of carbon black were added to uncured PDMS. No conductivity was observed for the resulting grid structures, possibly due to changes in material absorption.
dc.identifier.urihttps://theses-dissertations.princeton.edu/handle/88435/dsp01rr1721682
dc.language.isoen_US
dc.titleLaser Fabrication of Polymer-Based Mechanical Sensors Through Simultaneous Curing and Graphitization
dc.typePrinceton University Senior Theses
dspace.entity.typePublication
dspace.workflow.startDateTime2025-04-24T02:01:50.783Z
pu.contributor.authorid920289299
pu.date.classyear2025
pu.departmentMechanical & Aerospace Engr
pu.minorMaterials Science and Engineering

Files

Original bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
Sanchirico_Thesis_File.pdf
Size:
100.63 MB
Format:
Adobe Portable Document Format
Download

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
100 B
Format:
Item-specific license agreed to upon submission
Description:
Download